OEM 95% FC Steelmaking Carbon Additive Electrically Calcined Anthracite Coal
1. High mechanical strength, crushing rate and wear rate should not be higher than 3% (by weight).
2. Stable chemical properties, without toxic and harmful substances. It is insoluble in ordinary acid, alkaline and neutral water.
3. The particle size distribution is reasonable and the specific surface area is good. The appearance of the product is spherical and angular, glossiness is good, and it is screened by mechanical vibration for three times. The gradation accords with the relevant technical indexes.
4. The particle size range is less than the specified minimum diameter, according to the weight is not greater than 3%, greater than the specified upper limit of particle size, not more than 2% by weight.
|
Moisture Content |
≤ 3% | Fixed Carbon | ≥80-90% or as required |
| Porosity | 56% | Density | 1.4-1.6g/cm³ |
| Attrition Loss | ≤ 1.3% | Vol. Matter | ≤ 2.0% |
| Sulphur Content | ≤ 0.36% | Ash Content | ≤ 8.0% |
Application of anthracite coal:
Calcined Anthracite Coal/Gas Calcined Anthracite Coal/Carbon Raiser is mainly used in steelmaking in electrical stove, screening water, shipbuilding sandblast to remove rust. It can reduce the cost of steelmaking effectively by replacing the traditional petroleum coke of carburant.Also can improve the Carbon content in steel-melting and Ductile iron foundry.
Lvyuan has nearly 20 years of experience in the coal industry. The factory mainly deals in anthracite, coal, coconut shell charcoal and charcoal. Our factory can meet most of the requirements of customers. With strong strength and warm service attitude, our products are exported to many countries such as Europe, Asia, Africa, Australia, South America, etc., and are well received by customers.
