Polyacrylamide (PAM) is a general name of acrylamide homopolymer or copolymerized polymer with other monomers. It is one of the most widely used water-soluble polymers.
Polyacrylamide cationic pam anionic coagulant is used for:
(1) For sludge dewatering according to the nature of sludge can choose the corresponding model of this product, can effectively carry out sludge dewatering before sludge enters the press filter, when dewatering, the floc is large, non-stick filter cloth, not scattered during filtration, the flow mud cake is thicker, the dewatering efficiency is high, and the moisture content of the mud cake is below 80%.
(2) For the treatment of domestic sewage and organic wastewater, the suspended particles in the sewage with negative charge sewage flocculation and precipitation, clarification is very effective.
(3) The flocculant used for the treatment of the tap water from river water source has the advantages of small dosage, good effect and low cost, especially when combined with inorganic flocculant.
(4) Reinforcing agents and other auxiliaries for paper making. Improve the retention of fillers, pigments, paper strength.
(5) For oil field additives, such as clay swelling agent, oilfield acidification thickener.
(6) Used for textile sizing agent, slurry performance is stable, less pulp falling, fabric break rate is low, cloth surface clean.
Pre-sale Service
*Inquiry and consulting support.
*Sample testing support.
*View our Factory
*Free samples are avaliable.
After-sale Service
*Fast delivery
*Technical support.
*Regular telephone return visit.
* If there is any quality problem, replace it free of charge.
