Scale formation and hazards
Scale is caused by the long-term use of some containers that are often in direct contact with water, and a thick layer of impurities will grow on the inner wall.
The general reason for scale formation is: after the container has been boiled for many times, the calcium sulfate (CaSO4) that is slightly soluble in water in the water will precipitate due to the evaporation of water, and the previously dissolved calcium bicarbonate (Ca(HCO3)2) and magnesium bicarbonate (Mg(HCO3)2) will decompose in the boiling water, release carbon dioxide (CO2), and form crystals that are difficult to dissolve. Finally, scale is accumulated and formed.
Scaling will affect the heat transfer efficiency of heat exchange equipment, waste fuel, increase the operating costs of equipment, and in severe cases, cause equipment failure and scrapping. At the same time, scaling on the water pipe wall reduces the water flow rate and even causes the outlet to be blocked.
The "red water" and "yellow water" flowing out of the water pipe are also formed due to long-term scaling and corrosion. If the container is used to hold drinking water, there is a risk of excessive dissolution of heavy metal ions in drinking water.
Use silicon phosphorus crystal anti-scaling balls to prevent scale formation
Silicon phosphorus crystal is a high-tech product that is economically effective in preventing scaling and corrosion in water supply systems. Its main component, polyphosphate (NaP0:) n, can effectively inhibit and interfere with the growth of calcium carbonate crystals in water, preventing them from depositing and forming scale.
And it can generate complexation or integration reactions with calcium, magnesium, and iron ions that have already formed and adhered to the pipe wall, and then achieve the final scale inhibition effect through Brownian motion or water flow. The P-P component in silicon phosphorus crystals isolates the chemical reaction between dissolved oxygen in water and metal ions, preventing the further reaction of ferrous hydroxide to produce iron hydroxide, thereby suppressing the entire corrosion process.
Silicon phosphorus crystal, as a stable treatment agent for urban water supply, has a dual effect of corrosion and scale inhibition, preventing secondary pollution of water supply. The water treated with silicon phosphorus crystal is healthier and cleaner. Germany, South Korea and other countries have installed and used silicon phosphorus crystal products at tap water sources, with an annual usage of tens of thousands of tons. At present, this product is widely used in apartments, hospitals, hotels, school hot water boilers, solar hot water systems, heat exchangers, centralized heating systems, cooling water systems, and cooling systems for various machines.
Lvyuan Water Treatment is the Top 5 manufacturer of water chemical treatment agents (silicon phosphorus crystals) in China. For decades, it has been committed to the research and development of water treatment chemicals, with exquisite production technology and advanced production equipment. It has passed the IS09001 quality management system certification, and silicon phosphorus crystals fully comply with the United Nations drinking water quality standards. It has also passed the safety inspection of the Chinese Center for Disease Control and Prevention, fully complying with the "Hygienic Safety Evaluation Specification for Chemical Treatment Agents in Drinking Water".
