Flocculant PAM Partially Hydrolised Cationic Anionic Nonionic Powder Msds Polyacrylamide

High molecular weight polyacrylamide (PAM) is commonly used as a flocculant in water and wastewater treatment, as a soil conditioner, and as a viscosity modifier and friction reducer in both enhanced oil recovery and high volume hydraulic fracturing. These applications of PAM can result in significant environmental challenges, both in water management and in contamination of local water supplies after accidental spills. This paper provides a short review of current applications of high molecular weight PAM, including the potential for PAM degradation by chemical, mechanical, thermal, photolytic, and biological processes. Methods for treating wastewater containing partially degraded PAM are then discussed along with issues related to the potential toxicity and mobility of PAM in the environment after disposal or accidental release.

DVANTAGES

• 1. Economical to use - lower dosage levels.
• 2. Easily soluble in water; dissolves rapidly.
• 3. Non corrosive of suggested dosage, economical and effective at low levels.
• 4. Can eliminate the use of alum & further ferric salts when used as primary coagulants.
• 5. Reduction in sludge of dewatering process system.

APPLICATION FIELDS

• Raw Water Treatment
- Flocculation, Clarification
- Dewatering of Lime Alum Sludge and Recovery of Water

• Industrial Waste Water Treatment
- Primary Clarification
- Secondary & Tertiary Treatment
- Sludge Thickening & Dewatering
- Color Removal
- Dissolved Air Floatation
• Sewage Treatment
- Primary Treatment
- Sludge Thickening & Dewatering
• Process Industries

- Sugar and Juice Industry: Clarification
- Paper Making: Retention, Wet Strengthening Agent, Resident Agent &  

Water Recovery
- Sugar Manufacturing: Mud Settling
- Chlor-alkali: Brine Clarification
- Thermal Power: Clarification of Scrubber Water
- Mining & Metallurgy: Tailings Thickening and Water Recovery
- Coal: Tailings Thickening and Water Recovery

- Constructions: Solid and Road Stabilization, Concrete Making

• Petroleum and Gas Field:

-Drilling fluids, EOR, Profile Modification, Fluid loss control, Lubrication,

Shale Stabilization

STORAGE

Should be stored in original containers in cool and dry place, away from sources of heat, water and direct sunlight.

Shelf life is 2 years.