High Quality Coconut Shell Powder Activated Carbon
Powdered activated carbon is a type of carbon that has undergone special treatment, with countless small pores and a very large surface area. The surface area of each gram of charcoal is 500 to 1500 square meters. It is made from high-quality coconut shells, steam activated, refined, and crushed, collectively known as powdered activated carbon and powdered carbon .
Powdered carbon has advantages such as fast adsorption speed and sufficient adsorption capacity when used. Carbon has strong physical and chemical adsorption functions, but also has detoxification effects. It uses its huge area to adsorb toxins in the air of the carbon, thereby preventing the absorption of toxins. Carbon can also combine with various chemical substances, thereby preventing the absorption of these substances.
Powdered activated carbon is a very fine powder, with the majority passing through a 200 mesh sieve and the majority passing through a 325 mesh sieve. The size of the powder ranges from 1 to 150 μ Between m (approximately 40 on average μ m) ; Usually, the finer the carbon powder, the faster it adsorbs impurities. Powdered activated carbon is both an adsorbent and a decolorizer, and has very important applications in industries such as industrial wastewater, industrial exhaust gas, and food decolorization.
The caramel decolorization rate of powdered activated carbon reflects the adsorption performance of powdered activated carbon for colored substances. The adsorption value of coconut shell powdered activated carbon can reach 100-110. Mainly suitable for the decolorization, purification, deodorization, and impurity removal of high pigment solutions in various amino acid industries, refined sugar decolorization, monosodium glutamate industry, glucose industry, starch sugar industry, chemical additives, dye intermediates, food additives, pharmaceutical preparations, etc.
Powder activated carbon is widely used in the fields of tap water treatment and sewage treatment due to its excellent pore structure and strong adsorption and decolorization ability. Due to its reasonable pore structure, it has good adsorption capacity for the pollutants generated by garbage incineration and is widely used in the fields of garbage incineration power generation and solid waste incineration treatment.
Powder activated carbon has good applications in treating sudden odors and industrial pollutants in water. When using powdered carbon, adsorption tests must be conducted based on the type and concentration of pollutants to be removed to determine the type of activated carbon and the required amount of powdered carbon. Before adding powdered carbon, it should be noted that the carbon powder should be made into a carbon slurry and evenly added to water. The longer the contact time, the better the pollution removal effect.
The following safety issues should also be noted during the use of powdered carbon： When the dust concentration reaches a certain proportion, it is easy to encounter open flames, so smoking, sparks, and open flames are prohibited in the operation room; Avoid mixing with oxidants; Due to the small and light particles of powdered carbon, attention should be paid to dust pollution during use.
Operators must wear dust masks to avoid inhalation into the lungs. The injection charcoal produced has low impurities, high purity, fast filtration rate, and excellent performance in decolorization, purification, and purification. It is mainly used for decolorization, purification, and removal of "heat sources" in various injection reagents.
